Modbus Interface Board
The Modbus interface controls the sensor interfaces of the TriBox3, TriBox Mini or the TriOS G2 sensors with connectors, providing simple, flexible connection options. The TriBox is connected via a standard M12 extension cable. TriOS G2 sensors with M12 connectors can be connected directly. To operate the sensors, a power supply must be connected to the interface, which is connected directly to the sensor. Additional mounting holes in the aluminium L profile make installation easy. |
Voltage supply | 12…24 VDC (+/- 10%), only required for operation with sensors 2 pin PCB plug connector | |
G2 sensor connector | 1 M12 built-in socket | |
G2 sensor serial tap | 4 pin PCB plug connector | |
G2 sensor network tap | 1 RJ-45 socket, standard: IEEE 802.3i (10BaseT) | |
TriBox connection | 1 M12 built-in plug, connection via standard M12 extension | |
TriBox serial tap | 4 pin PCB plug connector | |
Operating temperature | 0...+40 °C | ~ +32 °F to +104 °F |
Storage temperature | -20...+70 °C | ~ -4 °F to +158 °F |
Relative air humidity | 0...95 % (non-condensing) | |
Protection type | IP10 | NEMA 1 |
Dimensions (width x height x depth) | 110 x 40 x 95 mm | ~ 4.3˝ x 1.6˝ x 3.7˝ |
Weight | 180 g | ~ 0.4 lbs |
Material | Aluminium | |
 |